Everything You Need To Know About Crack Filling

Posted by on Nov 30, 2014 in Uncategorized | 0 comments

If you need to fill in a crack in pavement or asphalt, then you might think the process would be very simple. In fact, there are a huge number of factors to consider when filling in cracks, enough to warrant the services of a professional paving contractor. Here are some of the considerations that must be made: According to the University of Texas, there are six criteria which should be met in order to proceed with a crack filling. Climate: an ambient temperature around 50-60 degrees Fahrenheit is ideal for sealing a crack. The procedure should also be conducted in winter, when cracks are open and more easily penetrable. Safety: filling a crack can be quite dangerous work, with the temperatures involved reaching over 350 degrees. Proper attire must be worn and the area must be cordoned off in order to protect the safety of the public. Traffic: while this may seem obvious, it is crucial that both foot and automobile traffic are considered. Work should be done during off-peak hours in order to minimize the impact. Proper guidelines must be followed in obstructing traffic, which may vary depending on your state. Crack Maintenance: if cracks are not cleaning prior to filling and sealing, then the entire process is very likely to fail. There are several methods available for cleaning cracks, most of which require the help of a professional.  Backer Rod: in the case of larger cracks, a special device called a backer rod is used to prevent the drainage of the sealant deep into the crack. Without one, an excessive amount of sealant would be required to fill larger cracks, which leaves more room for error and a higher total cost. Blotting: an important step when the crack in question cannot be allowed to set after the process. If the area must be immediately accessible after the sealant, blotting mixes aggregate with the sealant in order to prevent disruption of the sealant setting process. Many of these steps can be difficult and/or expensive if you are attempting to seal cracks yourself. In many cases, they require construction machinery which would cost far more than the project and you would only use once. Rentals are an option, but hiring a contractor can help save you a massive headache. Paving contractors can get the work done in a professional, timely manner, without any of the risk associated with DIY...

Read More

Six Strategies To Keep Your Home Safer

Posted by on Nov 24, 2014 in Uncategorized | 0 comments

When you think of ways to make your home a bit safer, you may overlook some fairly basic, practical strategies. Adopt the following practices in your own home to reduce incidents that could put you or your loved ones in jeopardy. Six strategies to make your home a bit safer include the following: Pave the exterior surfaces. Taking a tumble on the uneven surfaces around your home can result in injuries, and rough driveways may cause damage to your vehicle over time. The best way to approach safety outside the home is with paved surfaces, walkways, and drives. Seal coating, with companies such as ASAP Asphalt Sealing & Paving Co.,  is a quick and affordable way to flatten and smooth the areas around your home, making them easier to walk on and drive across. Invest in an alarm service. There are numerous alarm services and systems that will suit any budget, and many offer monthly rates for monitoring without hefty installment fees. These systems and services are ideal to keep homes and loved ones safe from intruders, burglars, or predators. Keep the property well-lit. Keep your home well-lit to deter any intruders that might be targeting empty homes, and to give it the feeling of being occupied. Another advantage of keeping your yard and home well-lit is that it will curb stumbles and falls, which will go a long way toward preventing injuries. If you are planning to be away, try setting your lights on a timer to give it a lived-in look. Take in the mail. If you go away, for a night or a month, be sure to enlist someone to take in your mail. Piles of mail are a sure sign to a burglar that the home is empty. Avoid potential intrusions by asking a neighbor, friend, or coworker to pick up mail, packages, or newspapers outside your home during your absence. Adopt a dog. Intruders are less likely to approach a house that is home to a barking dog. Posting signage that indicates a dog is on the property is another discreet way to send a message that you have a dog on the premise. Keep your pet contained at all times, with a fence on your property, to ensure that the dog doesn’t get injured or wreak havoc in the neighborhood. Clean out the garage. There are a number of toxic chemicals that could be lurking in your garage. It is pragmatic to clean out these potentially-harmful substances from time to time, to ensure that pets and loved ones don’t accidentally ingest them. Keep these items tightly covered and high-up on a shelf or in a cabinet in the garage for added safety. These six...

Read More

3 Factors Contributing To The Rise In Green Home Construction

Posted by on Nov 21, 2014 in Uncategorized | 0 comments

Did you know that green home construction is one of the fastest growing areas in the residential construction industry? This is in spite of the still sluggish housing market. Whether people are buying regular-sized homes with green features or are opting to join the tiny house movement, there is no doubt that green houses are in demand these days. That growth shows no signs of waning any time soon. Here are three factors driving the demand for new residential construction on green homes. 1. Green Homes Use Less Energy Green homes are built with energy efficient features as standard items. This greatly reduces the homeowner’s utility bills. Right now, the average homeowner pays about $2,150 a year in utilities. The energy efficient features in green homes can cut those costs by reducing energy use in the house by 30 to 60 percent. Those savings mean a lot to home buyers. They are willing to pay a little bit extra to get a green house built for them, knowing it will pay for itself over time with a reduction in energy bill costs. Depending on the features a home buyer has added to their home, those savings can be quite significant. 2. Today’s Home Buyers Are Environmentally Conscious There is a strong knowledge out there today of the importance of protecting the planet for this and future generations. Increasing numbers of people want to do the right thing for the environment in any ways available to them. This often means using green construction for their houses. In green construction, more environmentally friendly building materials are used and less waste is sent to the landfill. These are attractive construction features to environmentally conscious buyers. They are putting their money where their beliefs are by choosing green-built houses and green residential construction companies. 3. Green Homes Are Perceived as Higher Quality Homes There is a general perception out there that homes built to green standards are of higher quality than other houses. They do have fewer toxic materials in them, cleaner indoor environments, and building materials are generally built to strong, exacting standards. A green-built home is one that has many tangible benefits to it, and consumers are responding to that knowledge. Conclusion According to Dodge Data and Analytics, 62 percent of new residential construction companies are doing 15 percent of their business in green construction. This number will likely reach 84 percent of new residential construction companies. The growth in the demand for green-built homes means there will be new jobs in the industry, which will stimulate the U.S. economy. If you’re considering getting a green-built house made for you, there’s no better time than now. Talk to a residential contractor...

Read More

2 Reasons To Buy Used Construction Equipment

Posted by on Nov 20, 2014 in Uncategorized | 0 comments

Buying construction equipment can be very expensive, especially if you need something beyond basic hand tools. However, buying your tools used can provide a viable alternative. Two reasons to buy your tools and equipment used are cost and availability. Cost The biggest benefit to buying used construction equipment is that it is going to save you money. While lower prices are normal for used construction equipment, you will also have the option to get better prices because many companies will auction off used equipment. This low initial cost for used equipment and tools is perfect for a new contractor, or for someone that would like to be able to buy multiple pieces of equipment for the same price of a single new item. In addition, many used pieces of construction equipment will be refurbished before they are sold, which can restore them to near-new condition. Also, once the items have been refurbished, they will also come with a limited warranty, which will limit the risk of buying used equipment. Another cost benefit is that you will not have to worry about depreciation as much with a used piece of equipment. New equipment will depreciate quite a bit during the first year of ownership. However, when you buy a used piece of equipment the depreciation will have already been paid by the previous owner. Granted, depreciation will still occur over the life of the tool or piece of equipment, but the biggest drop in value will already have occurred when you buy used. Availability Used equipment is also widely available, which means that you can find just about any tool or piece of machinery that you need. In many cases, used tools will become available as construction companies go out of business, dealers attempt to sell off trade-ins, and companies sell their old equipment to make space for new models. Another benefit to purchasing used equipment is that there can often be a fairly long wait period for some pieces of new construction equipment. Depending on the popularity of the model or its features, you could end up waiting even longer to take delivery. Due to the many sources of used construction equipment, you can typically find the tool you need without having to wait a while to begin using it. Speak to your local used heavy construction equipment dealer today to see the many items that are available to you. Purchasing used equipment will allow you to get just about any tool or piece of machinery you need quickly, while also being able to save...

Read More

Tips For Cutting Back On Water Usage In Your Home

Posted by on Nov 19, 2014 in Uncategorized | 0 comments

In recent years, many homeowners have been searching for ways to cut back on the cost of utility bills in their homes. One of these ways is by being more conservative with the amount of water that is used each day. These are some easy tips to follow that truly can make a huge difference in how much water is used in your home each day. In the Kitchen When washing dishes, never leave the water to rinse with running. Fill up each side of the sink with the amount of water you need for washing and rinsing. Dishwashers actually use less water than washing dishes by hand. Installing an Energy Star labeled dishwasher can save both water and electricity. Use your garbage disposal only on rare occasions. Scraps from fruits and vegetables can be used for composting in your flower beds. This saves a substantial amount of water because they are not being flushed down the garbage disposal. Keep a pitcher of drinking water in your refrigerator. Pour water from the pitcher for drinking instead of running from the tap each time. Defrost frozen foods in the refrigerator or the microwave. You can save water by doing this instead of thawing them in a pan of water. In the Bathroom Keep showers short! Spend no more than five minutes in the shower. Always turn the water down while lathering up and shampooing your hair. Then, rinse completely all at once. This cuts back on the water that is used and the electricity that is used to heat the water. It also allows you to be in and out of the shower in a matter of minutes. While washing your hands, turn the water off while soaping up. While brushing your teeth, turn the water off until you are ready to swish. While shaving, place the stopper in the sink to hold water for rinsing your razor instead of allowing it to run. Check the toilet, faucets, and pipes under the sink to ensure there are no leaks. Even a slow leak can add up to the loss of thousands of gallons of water over time. Replace any parts that appear to have a leak. Be sure to check that the toilet flapper closes properly after flushing. Install a water saving shower head on all showers in your home. You can also replace your sink faucets and toilet with water conserving models that save many gallons of water each month. In the Laundry Room Always match the water level in your water with the size of the load of laundry you are washing. Never wash a small load in a full load of water. Wash dark colored clothes in...

Read More
Page 1 of 3123