How To Repoint The Mortar In A Brick Chimney

Posted by on Oct 21, 2015 in Uncategorized |

The mortar between the bricks in a chimney should leave no place for water to settle. This will prevent water from pooling up, freezing, and damaging the chimney through the process of frost wedging. Over time, however, the mortar in your chimney can start to wear out, and as it does, it can lead to damage to the bricks in your chimney. Whenever you notice that the mortar in your chimney is starting to fail, you need to act to repair it.  Recognizing Damage to Your Chimney Damage to mortar can be hard to see from a distance and hard to recognize if you don’t know what you are looking for. Thus, if the damage is near the top of your chimney, you will either need to use a ladder or climb up on your roof to get a good look at it. The first thing to look for once your are in place, is for mortar that is not flush with the face of the bricks that make up your chimney. Next, you should look for mortar that is cracked or crumbling. If you find these signs, you need to make repairs.  Repointing Your Chimney Making repairs to the mortar in a brick structure is known as repointing. Follow these steps to repoint your chimney: 1. Use a chisel and hammer to chip away any crumbling or cracked mortar.  2. Mix up a batch of mortar. Use two parts sand to one part cement and enough water to make a thick paste.  3. Put this mixture in a mortar bag. 4. Squeeze the mortar carefully into the cracks between the bricks.  5. Let the mortar dry for at least an hour.  6. Use a trowel to scrape away any mortar that sticks out past the face of the bricks in your chimney, making sure that you don’t remove so much mortar that it is no longer even with the surrounding bricks.  If you don’t repair damaged mortar in a chimney, it will continue to erode. When it does, it will no longer support the bricks of your chimney like it should, and they crack and or fall out. Thus, to keep your chimney looking good and to help it retain its structural integrity, you need to make sure that you inspect your chimney mortar regularly and make repairs when necessary. If you are uncomfortable making your repairs for any reason, then you need to call in professionals for help.  To learn more, contact a chimney repair company like Excel Chimney & Fireplace...

Read More

3 Smart Tips For Taping Off The Room For Paint Projects

Posted by on Oct 7, 2015 in Uncategorized |

If you decide to tackle the painting process on your own, you must master the art of prep work to achieve excellent results. Your success in taping off the room directly influences the final appearance of the paintjob. Appropriate tape application and removal controls the paint lines and eliminates splatter on otherwise unpainted surfaces. Once you master taping off, you can complete nearly any paint project in your home, from one color coverage to intricately designed accent walls. Here are three tips to help you master the fine art of taping off the room.   Don’t Press The Edges Down For quick and easy removal of the tape upon completion of the painting job, you need to leave the outside edge unattached. As you tape around trim, doorframes and windows, resist the urge to press the floating edge around the side of the protected surface. The floating edge will catch paint drips and direct them away from the trim boards or other unpainted surfaces. Furthermore, at the end of the job, you will not have to peel the tape off the surface with your nail. You can simply grab the open end and lift the paint off the surface with one smooth movement.   Verify Edge Seal With Nail Once you finish taping off the room, you will need to make sure the masking tape does not have any breaches in its connection points. If the tape has any air bubbles or uneven sections, it could allow paint to drip underneath, ruining the finish of that surface. Since the tape hides the drips, you would not even notice the problem until the paint soaks in and dries. You can verify the tape is securely connected by running your fingernail over the masked edge next to the wall. Remove Before The Paint Dries After you finish applying all of the paint coats, walk around the room and check for thickly coated areas threatening to drip. Upon verifying the paint is evenly applied and not at risk of dripping off the wall or ceiling surface, you must remove all of the masking tape at once. If you wait for the paint to dry before removing the tape, it will often tear pieces of dried paint off the wall with its removal. Instead, while the paint is still wet, you can carefully pull the tape off the protected surface and away from the wall for a clean removal. If you grow frustrated with mastering paint prep work, you can choose to assign the taping and painting tasks to your general contractor.  These skilled professionals can use their skills to tape off the room, paint and unmask all of the surfaces to create...

Read More